Page 6 of 36 |
1.04Client Side Connection Descriptions
| Section Title |
|
|
|
|
| Connections |
|
|
|
|
| Column Title |
| Function |
| Legal Values |
|
|
| Specify which port the |
| |
| Port |
| device is connected to the |
| |
|
|
| FieldServer |
|
|
| Protocol | Specify protocol used | eLumen | ||
| Baud* |
| Specify baud rate |
| 9600 – Vendor limitation |
| Parity* | Specify parity |
| None | |
| Data_Bits* |
| Specify data bits | 8 | |
| Stop_Bits* |
| Specify stop bits | 1 | |
| Handshaking* |
| Specify hardware |
| None |
|
| handshaking |
| ||
|
|
|
|
| |
| Poll _Delay* | Time between internal polls |
| ||
Example
//Client Side Connections
Connections
Port, | Protocol, | Baud, | Parity, | Data Bits, | Stop Bits, | Poll_Delay |
P1, | eLumen, | 9600, | None, | None, | 1, | 0.100s |
1.05Client Side Node Descriptors
| Section Title |
|
|
|
|
|
| Nodes |
|
|
|
|
|
| Column Title |
| Function |
| Legal Values |
|
| Node_Name |
| Provide name for node |
| Up to 32 alphanumeric | |
|
|
| characters | |||
|
|
|
|
| ||
|
|
| The eLumen processor |
|
|
|
| Node_ID |
| address - only decimal values |
| ||
|
| allowed e.g. 11 hex has to be |
| |||
|
|
|
|
|
| |
|
|
| entered as 17. |
|
|
|
| Protocol | Specify protocol used | eLumen | |||
| Port |
| Specify which port the device is |
| ||
|
|
| connected to the FieldServer |
|
|
|
| Node_type |
| Specifies the eLumen |
| Hex, decimal | |
|
| command and data format |
| |||
|
|
|
|
|
| |
1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408)
