Driver Scope of Supply | FieldServer FS-8700-84 manual

FS-8700-84_Lutron_eLumen Driver Manual

Page 2 of 36

2.Driver Scope of Supply

1.01Supplied by FieldServer Technologies for this driver

FieldServer Technologies	Description
PART #
FS-8915-10	UTP cable (7 foot) for RS-232 use
FS-8917-02	RJ45 to DB9F connector adapter
FS-8700-84	Driver Manual.

1.02Provided by the Supplier of 3rd Party Equipment

2.1.1.Required 3rd Party Hardware

Part #

Description

Lutron Panel

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 5

FieldServer FS-8700-84 Driver Scope of Supply, FieldServer Technologies Description, Required 3rd Party Hardware

Contents

Effective for all systems manufactured after May 1 FS-8700-84 Lutron eLumen Table of Contents Appendix B Appendix a Lutron eLumen Description Required 3rd Party Hardware Driver Scope of SupplyFieldServer Technologies Description FS-B2010 Hardware Connections Lutron Elumen RS-485 Example Section TitleColumn Title Function Legal Values None DAAreaNames, DASceneNames, DAZoneNames, xxxOffset Link, Area, Linkstation, Switch, Zone, Sysvar, PanelDALutList, DALutListOffset DALutParms, DALutParmsOffset ARS, RDBC, Wrbc Column Title Function Legal Values Timing Parameters Column Title Function Legal Values Column Title Function System Monitor Command Astro Times System Monitor Command Time Now System Monitor Command Bootcode Revision Level System Monitor Command DateSystem Monitor Command Code Revision Level System Monitor Command Area Status System Monitor Command Serial Number System Monitor Command Zone Intensity System Monitor Command Timeclock Status System Monitor Command System Variable Value System Monitor Command Request Panel Emergency Status System Monitor Command Switch Status System Monitor Command Wallstation Status Client side Map Descriptors MapDescriptors System Control Commands containing no Parameters Halt Zone Area timeclocks to disable Area timeclocks to re-enable System Control Commands containing no Parameters Run scripts Zone Intensity Fade Delay Zone number Area Scene Area tclk Enawallstation Ctrlwslist Link number Areas with scenes to stop ramp down System Control Commands Containing Parameters Toggle zone System Control Commands Containing Parameters Ramp zones up Zones to pommel or pulse Zones to flash System scene numbers System variable numbers NodeName GRAFIKcommand Link Rawswsts00 Passive Getnames AreaNames 511 Active read on startup Retrieving names FS-8700-84LutroneLumen Driver ManualPage 35 Comment Ver Rev Appendix B. Revision History Date Resp Format Driver