FieldServer FS-8700-84 instruction manual Zones to flash

FS-8700-84_Lutron_eLumen Driver Manual Page 30 of 36

4.1.41.System Control Commands Containing Parameters: Flash zones aka “Multi level ( Flash or Warn or Chase )“

// Client side Map Descriptors Map_Descriptors

Map_Descriptor_Name,	Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	DA_Lut_List,	DA_Lut_List_Offset,	DA_Lut_Parms,	DA_Lut_Parms_Offset,	Length
Flash_zone,	Lut_triggers,	24,	awt,	LUT_GRF6_0,	flash_zone,	Zone_list,	0,	Zone_pars,	0,	1
DA_Lut_List setup
Position from DA_Lut_List_Offset			Description
0-63			Zone(s) to flash
DA_Lut_Parms setup
Position from DA_Lut_Parms_Offset			Description
0			Delay1 cycles
1			Intensity1 ( 0-127 )
2			Fade1 cycles
3			Delay2 cycles
4			Intensity2 ( 0-127 )
5			Fade2 cycles
6			Delay2 cycles
7			Repeat ( 0-255 )

4.1.42.System Control Commands Containing Parameters: Ramp scene zones up

// Client side Map Descriptors Map_Descriptors

Map_Descriptor_Name,	Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	DA_Lut_List,	DA_Lut_List_Offset,	DA_Lut_Parms,	DA_Lut_Parms_Offset,	Length
Rmp_scn_zns_up,	Lut_triggers,	25,	awt,	LUT_GRF6_0,	ramp_scene_zones_up,	Area_list,	0,	Area_pars,	0,	1
DA_Lut_List setup
Position from DA_Lut_List_Offset			Description
0-31			System area numbers
DA_Lut_Parms setup
Position from DA_Lut_Parms_Offset			Description
0			Unaffected intensity ( 0-128 )
1			Initial rate step size
2			Repeat rate step size

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com