Fisher & Paykel manual Active Smart Maintenance, Divider Instructions Where Fitted

Models: Active Smart

1 68
Download 68 pages 23.78 Kb
Page 13
Image 13
Divider Instructions (Where Fitted)

Active Smart™ Special Features

US

Divider Instructions (Where Fitted)

To fit the divider, insert divider into bin on an angle, straighten and slot into place. To adjust the divider, fully extend the bin, partially lift the divider, slide sideways and re-slot into position.

Active Smart™ Maintenance

Replacement of the Interior Light (Halogen Light Bulb)

Turn the power off at the wall socket before replacing the bulb. The light bulb is located on the top roof of the cabinet at the front.

Remove the lens cover using a small screwdriver. Insert the screwdriver in the front center of the lens cover and gently lever down. Pull out old bulb.

Do not touch the new bulb with your hand. Leave it in the plastic bag whilst slotting into position. Remove plastic bag when bulb is in position.

Replace lens cover.

Turn power on. Light bulb should now glow.

Note:

The replacement halogen bulb must not exceed 12 Volt/10 Watt. Bulbs are available from your Fisher & Paykel Appliances Customer Care Center.

Your refrigerator is designed to operate for many years without the need for service checks. However, if your refrigerator is malfunctioning, have it attended to by your

Fisher & Paykel Appliances Authorised Service Center as soon as possible. All electrical repairs must be carried out by an adequately trained service technician or qualified electrician.

13

Page 13
Image 13
Fisher & Paykel manual Active Smart Maintenance, Divider Instructions Where Fitted, Active Smart Special Features