SECTION 5
I IMPORTANT
N | Recommended Drawer |
Front thickness for | |
T | Integrated products is |
5/8" to 3/4" (16mm to | |
| 18mm). |
Gthickness is 3/8" (9mm).
R
IMPORTANT
A
Drawer Front materialTmust be suitable for damp conditions or
E | adequately sealed to |
withstand moisture. |
DAdditional protection can be provided by using a “Moisture Resistant Board”.
P
RIMPORTANT
O | Allow for any |
| |
D | obstructions at the top of |
the cavity when allowing | |
| for space between the |
INFORMATION FOR CABINET MAKER FOR INTEGRATED DISHDRAWER
STEP 5.1 INTEGRATED DRAWER FRONT & TOE KICK DIMENSIONS
5.1.1
Use the following diagrams to work out the dimensions for the Integrated Panels for Drawer Fronts and Toe Kicks..
C T
IMPORTANT
A 1/4” (6mm) gap must be
Oprovided between top and bottom Drawer Front
Nin the position shown.L
Y
Page DD_15