I
N
T
E
G
R A T E D
P
R
O D U C T
O N L Y
IMPORTANT
All marking out should be done on the back surface of the Drawer Front.
IMPORTANT
When mounting the handle, ensure fastenings do not protrude beyond the back surface of the Drawer Front.
IMPORTANT
Accuracy is essential when cutting the Badge Mounting Hole to ensure a neat fit to hold the badge.
Page DD_17
5.1.2
Control Badge Position
Badge can be located anywhere within the Mounting Zone shown. Handle position will need to be taken into account.
5.1.3
Badge Cutout Dimensions
Cut out Badge Mounting Hole in the chosen position (see Control Badge Mounting Zone on
diagram above). A Control Badge Template (Part No. 526253) is available on request from Fisher & Paykel or alternatively a Template can be found on the Mounting Bracket enclosed with the product.
The Badge Mounting Hole is an ellipse shape.