March 2004 | Manual 599082 |
9.13Lid Removal
9.13.1Remove tub assembly as per instructions in 9.2.
9.13.2On the
to the yoke. Repeat for the
9.13.4 Refit in the reverse manner taking care that the lid is fitted the correct way around. The front is indicated on the top of the lid.
9.14Yoke Removal
9.14.1Remove the lid as per instructions in 9.13.
9.14.2Release the lid actuator connecting arm from the bottom of the yoke by squeezing the two tabs towards each other.
9.14.3Slide the front of the yoke downwards at an angle until it moves out
of the track in the rear of the trim, and is clear of the chassis flange. 9.14.4 Refit in the reverse manner taking care that the yoke is the correct
way around.
- 42 -