7.3.5.4 Setting the Serial Number
The followingcommand is used to set the serial number of the 1504:
*SN=<value><EOS> sets the instrument’s serial number
7.3.6 Other Commands
Remaining commands are described below.
7.3.6.1 Instrument Identification
The followingcommand returns the model number and firmware version
number:
*VER<EOS> returns the model and firmware version numbers
The syntax of the response isas follows:
ver.mmmm,v.vv
The m’srepresent digits of the model number. The v’s represent the digits of
the firmwareversion number. As an example, if the version number was 1.10
theresponse would be “ver.1504,1.10".
The followingIEEE-488.2 and SCPI compatible command can be used to read
the manufacturer,model number, serial number, and firmware version number.
*IDN?<EOS> returns identification data for the instrument
The syntax of the response isas follows:
HART,1504,<serial number>,v.vv
The v’srepresent the digits of the firmware version number. As an example, if
the serialnumber was 6A1202 and the version number was 1.10 the response
wouldbe “HART,1504,6A1202,1.10".
7.3.6.2 Reading a List of Commands
The followingcommand returns a list of commands:
H<EOS>
or
HELP<EOS> returns a listof commands
1504 Thermometer Readout
User’s Guide
34