Model 187 & 189
Users Manual
Returning to Factory Defaults
Your meter comes with the setup options preset at the factory. These factory settings are shown in Tables
1.Press O T until Fcty appears in the display.
2.Press % to select yE5; press T to select no.
If you select yE5, all setup options revert to the factory defaults; you cannot specify individual choices.
3.Press O T to exit the setup procedure and activate your selection.
If you selected yE5 in step 2, all factory settings are restored.
If you selected no, selections made in the Setup mode become active.
Saving Setup Options
At each setup option, store your choice and advance to the next option by pressing O T.
If you are storing the last option, this also exits the setup mode.
To exit the Setup mode without saving the present option, press O N(CANCEL).
Selections that were previously saved with O T are retained.
