Button Pushbuttons Yellow Button Description Function | Fluke 187

Model 187 & 189

Users Manual

Button

	Table 2-2. Pushbuttons

		Yellow Button
Description		Function

Description

Note

Press O to access “Yellow Button Functions.” The O box and the 24-hour clock appear in the lower corners of the display and the primary display freezes, allowing time to press a second button.

T

l

Q

M

D

Press to turn backlight on or off. Also, in Setup, use the arrow function (l) to select the previous digit or item in a list.

Press to freeze the displayed value. Press again to release the display.

Press to start retaining min, max, and average values. Press successively to display max, min, and average values. Press O N (CANCEL) to stop.

Press to store the present reading as an offset reference; subsequent readings show only the relative difference from this value. Press again to show the difference as a percentage of the reference.

SETUP

OT

AutoHOLD

O Q

FAST MN MX

O M

LOGGING

O D

Press to access Setup selections. Press to store a Setup selection and proceed to the next selection.

Press to begin AutoHOLD; the last stable reading is displayed.

Press to start FAST MN MX mode, where min and max values for short duration events are stored.

Press to start and stop Logging (Model 189). Press O + N (CANCEL) to stop.

2-8

Image 21

Fluke 187 user manual Button Pushbuttons Yellow Button Description Function

Contents

Model 187 Lifetime Limited Warranty Table of Contents Making Measurements Model 187 Iii Specifications Maintenance List of Tables List of Figures Viii Safety Information Before You StartContacting Fluke WWarning Safety Information Before You Start International Electrical Symbols Symbols Getting Acquainted IntroductionTurning the Meter On Automatic Power Off Battery Considerations Automatic Backlight Off Low Battery Indication Rotary Switch Rotary Switch Pushbuttons Pushbuttons Blue Key Function Rotary Switch Selections Position Rotary Switch Function View MEM Rotary Switch Positions Button Pushbuttons Yellow Button Description Function Yellow Button Function Pushbuttons Button Description Selecting the Range Understanding the DisplayPrimary Display Secondary Display Bar Graph Display Features Number Feature Display Features Description 8.8.8 Display Features Number Display Features Description Number Feature FMS8888 HM8888 8.8 Display Features Number 51000 Input Terminals Using the Input Terminals Display Hold and AutoHOLD Using Display Hold Using MIN MAX Using AutoHOLD Model 187 Min Max Avg Using Fast MN MX Using Hold with MIN MAX or Fast MN MX Using Relative Mode REL Measuring Voltage Making Measurements AC Voltage Measurement Measuring AC Voltage DBm Display DB Measurements in AC Volts Functions Both AC and DC Voltage Measurements Measuring DC Voltage AC and DC Display AC over DC DC over AC Capacitors before measuring resistance Measuring Resistance OFF Automatically subtract this value Testing for Continuity Using Conductance for High Resistance Tests For in-circuit tests, turn circuit power off Conductance Measurement Measuring Capacitance Capacitance Measurement Testing Diodes Diode Test Measuring Temperature Shock, do not connect the thermocouples toElectrically live circuits Input Ranges Measuring Current Measuring Current Input Alert Feature Following are some tips for measuring current Measuring AC Current 11. AC Current Measurement Measuring DC Current Current through one component Total current to circuit 13. Functions Allowing Frequency Measurement Measuring Frequency 14. Hz Display Measuring Duty Cycle Measures Negative Pulse Measures Positive Pulse 16. Duty Cycle Display Measuring Pulse Width Start and Stop on Negative Slope Start and Stop on Positive Slope 18. Pulse Width Display Types of Memory Using Memory & Communications FeaturesSaved Readings Memory Logged Readings Memory Storing Saved Readings Starting LoggingStopping Logging To avoid electric shock, disconnect the test Viewing Memory Data MEM View Display Clearing Memory Using Communications 187 Selecting Setup Options Changing the Default Settings Factory Default Function Specific Setup SelectionsPrecondition Option Choices Common Setup Selections Adjusting the Temperature Offset Changing the Default Settings Setting the Power Off Timeout Selecting Display Resolution 3 1/2 or 4 1/2 Digits Setting the Line Main Frequency Setting the 24-Hour Clock Saving Setup Options Returning to Factory Defaults Maintenance Introduction General MaintenanceTesting the Fuses Replace F2 if Replace F1 if Displayed Replacing the Batteries Battery and Fuse Replacement Replacing the Fuses User-Replaceable PartsCase of Difficulty MP8 MP9 Safety and Compliances Specifications Physical Specifications Feature Summary Basic Specifications Detailed Accuracy Specifications 45-1 kHz Accuracy Function20 kHz KHz-100 kHz DC a 500.00 Ω Capacitance Diode Test MIN MAX AVG Burden Voltage A, mA, µA Frequency Counter Sensitivity Input Characteristics