Fluke 196C user manual Analyzing a TrendPlot or Scope Record, Triggered Single Sweep Recording

Fluke 196C/199C

Users Manual

10	Select the desired trigger slope,
	and jump to Level:
11	Select the 0.12V or 1.2 V trigger
	level and accept all recorder
	options.

During recording samples are continuously saved in deep memory. The last nine recorded divisions are displayed on the screen. Use View All to display the full memory contents.

Note

To learn more about the Single Shot trigger function, see Chapter 5 “Triggering on Waveforms”.

Figure 20. Triggered Single Sweep Recording

Analyzing a TrendPlot or Scope Record

From a Scope TrendPlot or Scope Record you can use the analysis functions CURSORS and ZOOM to perform detailed waveform analysis. These functions are described in Chapter 4: “Using Replay, Zoom and Cursors”.

36