Fluke user manual Replaying Step-by-Step, Replaying a Waveform, Fluke 196C/199C

Fluke 196C/199C

Users Manual

Replaying Step-by-Step

To step through the last scope screens, do the following:

1	From scope mode, open the
	REPLAY menu.

Observe that the trace is frozen and that REPLAY appears at the top of the screen (see Figure 21).

2	Step through the previous
	screens.
3	Step through the next screens.

Observe that the bottom of the waveform area displays the replay bar with a screen number and related time stamp:

Figure 21. Replaying a Waveform

The replay bar represents all 100 stored screens in memory. The icon represents the picture being displayed on the screen (in this example: SCREEN -84). If the bar is partly white, the memory is not completely filled with 100 screens.

From this point you can use the zoom and cursor functions to study the signal in more detail.

38