Fluke user manual look at all the stored glitches, Fluke 196C/199C, Select 5 ms

Fluke 196C/199C

Users Manual

To set the pulse width to 5 ms, do the following:

7

8

Enable the arrow keys to adjust the pulse width.

Select 5 ms.

All narrow positive pulses shorter than 5 ms are now displayed on the screen. (See Figure 31.)

Tip

The test tool stores all triggered screens in the replay memory. For example, if you setup your

triggering for glitches, you can capture 100Figure 31. Triggering on Narrow Glitches glitches with time stamps. Use the REPLAY key to

look at all the stored glitches.

56