Fluke 196C Automatic Trigger Options, Open the Trigger Options menu, Open the Automatic Trigger

Fluke 196C/199C

Users Manual

Automatic Trigger Options

In the trigger menu, settings for automatic triggering can be changed as follows. (See also Chapter 1: “Displaying an Unknown Signal with Connect-and-View”)

1 Display the TRIGGER key labels.

Note

The TRIGGER key labels can differ depending on the latest trigger function used.

2 Open the Trigger Options menu.

If the frequency range of the automatic triggering is set to

>15 Hz, the Connect-and-View™ function responds more quickly. The response is quicker because the test tool is instructed not to analyze low frequency signal components. However, when you measure frequencies lower than 15 Hz, the test tool must be instructed to analyze low frequency components for automatic triggering:

4	Select > 1 HZ and return to the
	measurement screen.

3	Open the Automatic Trigger
	menu.

48