Fluke 875 manual Pull Box Assembly, Flexible Tubing 878-12-30TAB, Cables/Connectors/Panel

Victoreen 875

Operators Manual

Pull Box Assembly (878-12-5)

The 878-12-5 Pull Box Assembly is designed to allow for thermal expansion of the detector cables and to provide a service loop. Various optional pull-box configurations are available per Table 1-1. For more information refer to Section 2, Appendix B, and Appendix C.

Table 1-1.	Pull-box Variations
Model	Inlet, Size and Location	Outlet, Size and	Inlet/Outlet Orientation
		Location
878-12	1" 270°	2, ¾", 90°	180°
878-12-M 1	1" MNPT 270°	2, ¾", 90°	180°
878-12-M2	1" MNPT 270°	2, 1", 90°	180°
878-12-M3	1" 270°	1, 1", 90°	180°
878-12-M4	1" 270°	1, 1", 90°	90°
878-12-M5	¾" 270°	2, ¾", 90	180°
878-12-M6	2, ¾" 0°/360°	2, ¾", 90	90°
878-12-M7	1" MNPT 270°	2, ¾", 90	90°
878-12-M8	2, ¾", 0°	1,1", MNPT, 90°	90°
878-12-M9	1,1" MNPT 90°	1, ¾" MNPT, 120°	150°
		1, ½" MNPT, 210°	210°
878-12-M10	1,1" MNPT	2, ¾ 90°	0°
878-12-M11	2, ¾", 90°	1,1" MNPT 90°	0°
878-12-M12	2, ¾", 270°	1" MNPT, 0°	90°

Flexible Tubing (878-12-30TAB)

1.0inch diameter flexible stainless steel tubing is available in various lengths to interconnect the 877-1 Detector to the first pull-box.

Cables/Connectors/Panel

In-Containment Cable: (878-1-9-TAB)

Ex-Containment Cable: (50-103-TAB)

Replacement Detector Connector Kit: (878-7-5)

Blank Panel: (844-8-5)

Optional Equipment

The following optional equipment is available:

878-10 Field Calibrator - 250 mCi 137Cs

1-4