148 01-28007-0068-20041203 Fortinet Inc.
Networks list Router
To configure RIP general settings
1Go to Router > RIP > General.
2Select the default RIP Version.
3Change the Default Metric if required.
4Select Enable Default-information-originate if the configuration requires advertising a
default static route into RIP.
5Only change the RIP timers if required.
RIP timer defaults are effective in most configurations. All routers and access servers
in the network should have the same RIP timer settings.
6Select Apply.
To configure RIP route redistribution
1Go to Router > RIP > General.
2Select Connected or Static or both.
3Enter the Default Metric to be used for the redistributed routes.
4Select a Route-map name.
5Select Apply.
Networks list
Identify the networks for which to send and receive RIP updates. If a network is not
specified, interfaces in that network will not be advertised in RIP updates.
Figure 58:RIP Networks list
Route-map Enter the name of the route map to use for the redistributed connected
routes. For information on how to configure route maps, see “Route-map
list” on page157 .
Static Advertise routes learned from static routes.
Metric Enter the metric to be used for the redistributed static routes.
Route-map Enter the name of the route map to use for the redistributed static routes.
For information on how to configure route maps, “Route-map list” on
page157.
Create New Add a new RIP network.
IP/Netmask The IP address and netmask for the RIP network.
The Delete, and Edit icons.