System network Zone settings
FortiGate-100A Administration Guide 01-28007-0068-20041203 59
To add a zone
1If you have added a virtual domain, go to System > Virtual Domain > Current
Virtual Domain and select the virtual domain to which you want to add the zone.
2Go to System > Network > Zone.
3Select Create New.
4In the New Zone dialog box, type a name for the zone.
5Select the Block intra-zone traffic check box if you want to block traffic between
interfaces or VLAN subinterfaces in the same zone.
6Select the names of the interfaces or VLAN subinterfaces to add to the zone.
7Select OK.
To delete a zone
You can only delete zones that have the Delete icon beside them in the zone list.
1If you have added a virtual domain, go to System > Virtual Domain > Current
Virtual Domain and select the virtual domain from which to delete the zone.
2Go to System > Network > Zone.
3Select Delete to remove a zone from the list.
4Select OK to delete the zone.
To edit a zone
1If you have added a virtual domain, go to System > Virtual Domain > Current
Virtual Domain and select the virtual domain in which to edit the zone.
2Go to System > Network > Zone.
3Select Edit to modify a zone.
4Select or deselect Block intra-zone traffic.
5Select the names of the interfaces or VLAN subinterfaces to add to the zone.
6Clear the check box for the names of the interfaces or VLAN subinterfaces to remove
from the zone.
7Select OK.
Management
Configure the management interface in Transparent mode to set the management IP
address of the FortiGate unit. Administrators connect to this IP address to administer
the FortiGate unit. The FortiGate also uses this IP address to connect to the FDN for
virus and attack updates (see “Update center” on page118).
You can also configure interfaces to control how administrators connect to the
FortiGate unit for administration. See “To control administrative access to an interface”
on page 57.