System network

Configuring interfaces

 

 

SSH To allow SSH connections to the CLI through this interface.

SNMP To allow a remote SNMP manager to request SNMP information by connecting to this interface. See “Configuring SNMP” on page 98.

TELNET To allow Telnet connections to the CLI through this interface. Telnet connections are not secure and can be intercepted by a third party.

MTU

To improve network performance, you can change the maximum transmission unit (MTU) of the packets that the FortiGate unit transmits from any interface. Ideally, this MTU should be the same as the smallest MTU of all the networks between the FortiGate unit and the destination of the packets. If the packets that the FortiGate unit sends are larger, they are broken up or fragmented, which slows down transmission. Experiment by lowering the MTU to find an MTU size for best network performance.

To change the MTU, select Override default MTU value (1500) and enter the maximum packet size. For manual and DHCP addressing mode the MTU size can be from 576 to 1500 bytes. For PPPoE addressing mode the MTU size can be from 576 to 1492 bytes.

Note: In Transparent mode, if you change the MTU of an interface, you must change the MTU of all interfaces to match the new MTU.

Log

Select Log to record logs for any traffic to or from the interface. To record logs you must also enable traffic log for a logging location and set the logging severity level to Notification or lower. Go to Log & Report > Log Config to configure logging locations and types. For information about logging see “Log & Report” on page 339.

Configuring interfaces

Use the following procedures to configure FortiGate interfaces and VLAN subinterfaces.

To bring down an interface that is administratively up

To add interfaces to a zone

To add an interface to a virtual domain

To change the static IP address of an interface

To configure an interface for DHCP

To configure an interface for PPPoE

To add a secondary IP address

To configure support for dynamic DNS services

To add a ping server to an interface

To control administrative access to an interface

To change the MTU size of the packets leaving an interface

To configure traffic logging for connections to an interface

FortiGate-100A Administration Guide

01-28007-0068-20041203

53

Page 53
Image 53
Fortinet 100A manual Log, Configuring interfaces

100A specifications

Fortinet 100A is a versatile network security device designed to provide comprehensive protection against various cyber threats while ensuring optimal network performance. As part of the FortiGate series, the 100A combines advanced security features with powerful hardware capabilities, making it suitable for small to medium-sized businesses.

One of the key features of the Fortinet 100A is its deep packet inspection technology. This capability allows the firewall to analyze both the header and payload of packets traversing the network, enabling it to detect and block malicious content effectively. The 100A can identify and mitigate a wide range of threats, including malware, intrusions, and application-layer attacks.

The FortiOS operating system powers the Fortinet 100A, offering a robust and user-friendly interface for configuration and management. With its unified security management console, administrators can efficiently monitor network traffic and enforce security policies across the organization. The system provides centralized logging and reporting features, enabling users to gain valuable insights into their security posture and respond swiftly to incidents.

The 100A supports multiple deployment modes, including transparent, NAT, and route modes. This flexibility allows organizations to integrate the device into their existing network architecture with ease. The firewall's high throughput capabilities ensure that network performance remains unaffected, even under heavy load from multiple users and devices.

Another notable aspect of the Fortinet 100A is its support for various VPN technologies, including IPsec and SSL VPN. This feature facilitates secure remote access for employees, enabling them to connect to the corporate network safely, regardless of their location. As remote work continues to be a norm in many sectors, this capability is critical for maintaining productivity and security.

In addition to these features, the Fortinet 100A provides comprehensive web filtering capabilities, protecting users from harmful websites and inappropriate content. This protection is essential for organizations looking to maintain a secure and productive environment.

With its combination of powerful security features, flexible deployment options, and robust performance, the Fortinet 100A stands out as an ideal solution for organizations seeking to bolster their cybersecurity measures while ensuring seamless connectivity for users. As cyber threats continue to evolve, investing in a capable device like the FortiGate 100A is crucial for maintaining a secure network infrastructure.