Fortinet 100A manual Neighbor command keywords and variables, 178

config router ospf	Router
	config neighbor
	edit <id_integer>
	show
	end

Note: Only the ip keyword is required. All other keywords are optional.

neighbor command keywords and variables

Keywords and	Description	Default	Availability
variables
cost	Enter the cost to use for this neighbor. The	10	All models.
<cost_integer>	valid range for cost_integer is 1 to
	65535.
ip <address_ipv4>	Enter the IP address of the neighbor.	0.0.0.0	All models.
poll-interval	Enter the time, in seconds, between hello	10	All models.
<seconds_integer>	packets sent to the neighbor in the down
	state. The value of the poll interval must be
	larger than the value of the hello interval.
	The valid range for seconds_integer is 1
	to 65535.
priority	Enter a priority number for the neighbor.	1	All models.
<priority_integer>	The valid range for priority_integer is
	0 to 255.

Example

This example shows how to manually add a neighbor.

config router ospf

config neighbor edit 1

set ip 192.168.21.63

end

end

This example shows how to display the settings for neighbor 1.

config router ospf

config neighbor edit 1

get end

This example shows how to display the configuration for neighbor 1.

config router ospf

config neighbor edit 1

show end

178 01-28007-0068-20041203 Fortinet Inc.