Router Networks options
FortiGate-100A Administration Guide 01-28007-0068-20041203 149
Networks options
Figure 59:RIP Networks configuration
To configure a RIP network
1Go to Router > RIP > Networks.
2Select Create New to add a new RIP network or select the edit icon beside an existing
RIP network to edit that RIP network.
3Enter the IP address and netmask for the network.
4Select OK.
Interface list
Configure RIP version 2 authentication, RIP version send and receive for the specified
interface, and configure and enable split horizon.
Authentication is only available for RIP version 2 packets sent and received by an
interface. Set authentication to None if Send Version or Receive Version are set to 1
or 1 2.
Figure 60:RIP interface list
Create New Add a new RIP interface.
Interface The FortiGate interface name.
Send Version The RIP send version for this interface.
Receive Version The RIP receive version for this interface.
Split-Horizon The split horizon type.
Authentication The authentication type.
The Delete and Edit icons.