Fortinet 100A - page 130

130 01-28007-0068-20041203 Fortinet Inc.
Registering a FortiGate unit System maintenance
2Select Reboot.
3Select Apply.
The FortiGate unit restarts.
To shut down the system
You can restart the FortiGate unit after shutdown only by turning the power off and
then on.
1Go to System > Maintenance > Shutdown.
2Select Shutdown.
3Select Apply.
The FortiGate unit shuts down and all traffic flow stops.
To reset the FortiGate unit to factory defaults
Use the following procedure to reset system settings to the values set at the factory.
This procedure does not change the firmware version or the antivirus or attack
definitions.
1Go to System > Maintenance > Shutdown.
2Select Reset to factory default.
3Select Apply.
The FortiGate unit restarts with the configuration that it had when it was first powered
on.
4Reconnect to the web-based manager and review the system configuration to confirm
that it has been reset to the default settings.
!
Caution: This procedure deletes all changes that you have made to the FortiGate configuration
and reverts the system to its original configuration, including resetting interface addresses.