Fortress Technologies ecure Wireless Access Bridge - page 24

Fortress Wireless Access Bridge: Installation
14
5From the main menu, select SECURITY SETTINGS, and on the
SECURITY SETTINGS screen, in the CHANGE ACCESS ID
section:
In Current Access ID enter 16 zeros or the word
default.
In New Access ID enter the 16-digit hexadecimal
Access ID to be used by the Bridge and its Secure
Clients.
CAUTION: For se-
curity reasons, the
Access ID in effect on
the Bridge cannot be
displayed. Make a note of
the new Access ID: you
will need it to configure
the Bridge’s Secure Cli-
ents, as well as to
change the Access ID on
the Bridge.
In the Confirm New Access ID field, re-enter the new
Access ID to ensure against entry errors.
Click Apply.
CAUTION: The
Bridge is not se-
cure until you have
changed the default Ac-
cess ID and wireless
SSIDs and reset both
GUI passwords and the
CLI password to a mini-
mum of eight, mixed al-
phanumeric, upper- and
lowercase characters.
6From the main menu on the left choose BRIDGE PASSWORD,
and on the BRIDGE PASSWORD screen:
Leave User Name at its default setting, admin.
In Current Password, enter the default system
administrator password: admin.
In New Password, enter the password to be used to
access administrative functions on the Bridge GUI.
In Confirm New Password, re-enter the new password.
Click Apply.
7On the same PASSWORD screen, repeat Step 6, except in
User Name, select operator from the dropdown menu.
detail:
detail: