Fortress Bridge: Monitoring and Diagnostics
75
5.5 Diagnostics
NOTE: Radio 1
uses antenna port
1 (ANT1); Radio 2 uses
antenna port 2 (ANT2).
Access Fortress Bridge diagnostic utilities by logging into the
Bridge GUI admin account and selecting DIAGNOSTICS from the
menu on the left.
The DIAGNOSTICS screen displays:
The version and build number of the firmware currently
running on the Fortress Bridge, under SOFTWARE VERSION.
The DEVICE ID of the Fortress Bridge, as uniquely generated
for each device on a Fortress-secured network and used,
when applicable, for device authentication. (Refer to
Section 4.1 for more information about Device IDs.)

5.5.1 Pinging a Device

1Log on to the Bridge GUI admin or operator account and
choose DIAGNOSTICS from the menu on the left.
2On the DIAGNOSTICS screen under UTILITIES, in Ping IP
Address, enter the IP address of the device you want to
ping.
3Click GO. The Bridge will ping the target IP five times and
display the PING RESULTS.

5.5.2 Tracing a Packet Route

1Log on to the Bridge GUI admin or operator account and
choose DIAGNOSTICS from the menu on the left.
2On the DIAGNOSTICS screen under UTILITIES, in Traceroute
IP Address, enter the IP address of the device to which you
want to trace the route.
3Click GO. The Bridge will trace the route to the target IP and
display the TRACEROUTE RESULTS.
detail: