Fostex LM16 manual Connecting the power cord, Preparation of power supply

Model LM16 [Before using the unit]

Preparation of power supply

Connecting the power cord

Using the supplied power cord, con- nect the [AC IN] connector on the rear panel of the main unit and the AC outlet.

<Note>: Use only the supplied power cord.

	INPUT
AUX SEND (-2dBu)	INSERT	INSERT	INSERT	INSERT	INSERT	INSERT	INSERT	INSERT
MIDI OUT		CONTROLLER
				PHANTOM	POWER

AC outlet

Turning on the power

Press down the [POWER] switch on the rear panel of the main unit to turn on the power.

		INPUT
EFF SEND (-2dBu)	AUX SEND (-2dBu)	INSERT	INSERT	INSERT	INSERT	INSERT	INSERT	INSERT	INSERT
USB	MIDI OUT		CONTROLLER
					PHANTOM	POWER

[POWER] switch

To turn on or off the LM16 and peripheral devices which are connected to the LM16, follow the proper procedures described below.

Procedures of turning on the power after connecting peripheral devices

<Note>: Before turning on or off the LM16 and peripheral devices which are connected to the LM16, make sure that the channel faders and monitor gain control of the LM16, as well as the volume control of an monitor amplifier (or powered monitor speaker), are set to minimum. Otherwise, a loud sound may be produced suddenly that may damage the speaker or your hearing.

(1)Turn on the devices connected to the [INPUT] connectors to the LM16.

(2)Turn on the LM16.

(3)Turn on the monitor amplifier (or powered monitor speaker).

Procedures of turning off the power after connecting peripheral devices

(1)Turn off the monitor amplifier (or powered monitor speaker).

(2)Turn off the LM16.

(3)Turn off the devices connected to the [INPUT] connectors to the LM16.

15