Fostex LM16 Effect to Group controls, Effect to Stereo control, Effect to AUX 1, 2, 3 controls

Model LM16 [Names and functions]
		(22) [EFFECT TO GROUP] controls
		Each control adjusts the output level from the
		internal effects to the corresponding group buss pairs
		(1-2 or 3-4). See page 31 for details.
		(23) [EFFECT TO STEREO] control
		Adjusts the output level from the internal effects to
		the stereo busses. See page 31 for details.
		(24) [EFFECT TO AUX (1, 2, 3)] controls
		Each control adjusts the output level from the
	17	internal effects to the corresponding AUX buss (1, 2
		or 3). See page 31 for details.
18	19	(25) [AUX SEND] controls / [SOLO] switches
		Each [AUX SEND] control adjusts the output level of
		the corresponding AUX SEND (1, 2 or 3) output.
		Each [SOLO] switch allows you to monitor the soloed
		signal of the corresponding AUX SEND (1, 2 or 3)
	20	output. When the switch is down, the solo function is
		engaged. Each press of the switch toggles between
		on and off (See page 30 for details).
	21	(26) [MONITOR] control
		Adjusts the output level of the [MONITOR (L/R)] and
	23	[PHONES] jacks. The output level of the [PHONES]
22		jack is controlled by the [PHONES] and [MONITOR]
		controls (See page 32 for details).
	24 (27) [EFF SEND] control / [SOLO] switch
		Adjusts the output level of the EFFECT SEND .
	25	Each [SOLO] switch allows you to monitor the soloed
		signal of the EFFECT SEND output. When the switch
		is down (	), the solo function is engaged. Each press
26	27	of the switch toggles between on and off.
28		(28) [ASSIGN TO STEREO OUT] switches
	29	Each switch allows you to send the post signal of the
		corresponding GROUP fader to the [STEREO OUT
		L/R] jacks. When the switch is down, the signal is
		sent ( See page 33 for details).
		(29) [OUTPUT LIMITER] switch
		Activates or deactivates the limiter function for all
		the buss outputs (stereo L/R outputs, group outputs
		1 through 4, Aux send outputs 1 through 3, effect
		send output, and monitor outputs). When the switch
30	31	is down (	), the limiter function is active.
		(30) [GROUP 1-4] faders
		Each fader adjusts the output level of the
		corresponding group output signal which is output
		from the [GROUP OUT] jack (See page 33 for details).
		(31) [STEREO] fader
		Adjusts the output level of the stereo output signal
		which is output from the [STEREO OUT (L/R)] and
		[ST MIX OUT (L/R)] jacks.

24