9)Use the [MENU/ENTER] knob to select "[EXECUTE]" and press the [MENU/ENTER] knob.
The display now shows the status of finalizing. When finalizing is completed, "Completed" is shown and the disc is automatically ejected from the
The following shows how audio CD data is writ- ten to a
•Writing a single stereo WAV file in the "Track at once" mode:
Track 1
•Writing four stereo WAV files in the "Track at once" mode:
A
Track 1
Track 2 |
Track 3
Track 4
: Approximately two-second silence (mute)
<Note>: Once you finalize a disc written in the "Track at once" mode, you cannot make addi- tional writing any more.
If you reload the finalized disc and attempt to write a file, "Already Finalized" is popped up and operation is cancelled.
10)Press the [MENU/ENTER] knob.
The display returns to the USB HOST menu screen, where "CD Finalize 
" is highlighted.
You can check the TOC information after final- ized. See "Viewing the TOC information after finalizing" for on page 27 details.
11)Press the [STOP] key to exit the MENU mode.
You can also exit the MENU mode by selecting "
Back" and pressing the [MENU/ENTER] knob repeatedly.
•Writing a single stereo WAV file with only CUE01 in the "Disk at once" mode:
Track 1
•Writing a single stereo WAV file with three CUE points in addition to CUE01 in the "Disk at once" mode:
The file is divided into four tracks with no silence between tracks.
Track 1
Track 2
Track 3
Track 4
25
