Viewing the TOC information after finalizing
The following assumes that a disc automatically finalized after "Disk at once" writing or a disc finalized after "Track at once" writing is ejected from an external 
" is highlighted.
1)Close the ejected disc tray of the CD-R/RW drive.
Push the front of the disc tray gently by hand. The finalized disc is loaded.
Confirm that the "CD Finalize 
" is highlighted on the screen.
<Note>: When you close the tray, the drive starts reading the disc and the access indica- tor starts flashing. Therefore, do not carry out the next operation until the drive stops access- ing and the access indicator gets unlit.
2)Use the [MENU/ENTER] knob to select "CDTOC 
" and press the [MENU/ENTER] knob.
The display shows "Please Wait...", followed by the TOC information, as with "Viewing the TOC information before finalizing".
However, in this case, the remaining time is shown as "0h 00m 00s", which means no more tracks can be recorded to this finalized disc.
<Note>: When you burn multiple stereo WAV files by "Track at once" and finalized or you burn a stereo WAV file with multiple CUE points by "Disk at once", the Track list screen looks like the one below (the remaining time is shown as "0h 00m 00s", of course).
<Note>: You can also view the TOC of a com- mercially available audio CD, as with an audio CD you create using the
To do this, set an audio CD to the
Note that you can view only the playing time of each track. You cannot view track titles.
3)After checking the TOC information, use the [STOP] key to exit the MENU mode.
The display returns to the Home screen.
27
