3)Use the [MENU/ENTER] knob to select "Song Export 
" and press the [MENU/ENTER] knob.
The display now shows the screen for setting the start time, end time and exported tracks. The display now highlights “[EXECUTE]”.
5)After editing the start time, press the [MENU/ENTER] knob.
"Start Time: *m **s ***" is now highlighted.
6)Use the [MENU/ENTER] knob to select
"EndTime" and press the [MENU/ENTER] knob.
You can now edit the end time of the exported file(s).
By default, these items are set as follows.
•Start time: The beginning of a song (ABS 0)
•End time:The last recording position of a song
•Track selection: All tracks (1 through 8)
In other words, by default, you can export full length of all tracks. If you export a song data with the default setting above, skip to step 10. If you edit the setting, go to steps 4 through 9.
Flashing |
7)After editing the end time, press the [MENU/ENTER] knob.
"End Time: *m **s ***" is now highlighted.
4)Use the [MENU/ENTER] knob to select "StartTime: 0m 00s 000" and press the [MENU/ENTER] knob.
You can now edit the start time of the exported file(s).
8)Use the [MENU/ENTER] knob to select "TRK" and press the [MENU/ENTER] knob.
You can now select the exported tracks. Selected tracks are highlighted.
Only TRK "1" flashes.
Flashing |
Flashing |
<How to edit a time>
To edit the start or end time of the ex- ported file(s), use either of the following operation methods.
<Note>: A blank track is not highlighted.
• Using the [MENU] dial:
Use the [REWIND] or [F FWD] key to move the editing point and use the [MENU/ENTER] knob to edit the value.
• Using the numeric keys:
Directly enter a desired number using the appropriate numeric key. Each time you press a numeric key, the entered numbers on the screen move from the right towards the left. You can also use the [REWIND] or [F FWD] key to move the editing point.
<How to select or deselect a track>
Rotating the [MENU/ENTER] knob left dese- lects the flashing track, while rotating the [MENU/ENTER] knob right selects the flash- ing track.
Use the [F FWD] and [REWIND] keys to se- lect the flashing track.
9)After selecting/deselecting the exported tracks, press the [MENU/ENTER] knob.
"TRK" is now highlighted.
18
