Fostex MR-8HD/CD supplementary manual About Track at once and Disk at once

MR-8HD/CD Supplementary manual

About "Track at once" and "Disk at once"

The MR-8HD/CD provides two burning modes for creating an audio CD in the CD-DA format.

"Track at once"

The unit burns a stereo WAV file to a CD-R/RW disc as a track. You can burn an additional track at a later time until the disc is finalized. Each time you burn a file, a TOC is created. Approximately two-second silence is automatically inserted between tracks.

"Disk at once"

The unit burns a stereo WAV file and automatically finalizes the disc. You cannot burn an additional data. As described earlier in "2 MIX file playback mode", when one or more CUE points are set to the stereo WAV file, file data is divided into tracks at the CUE points.

In this mode, no mute space is created between tracks. (Note that if the stereo WAV file does not have any CUE point, it is burned as a single track.)

The following is assumed that a song which has a stereo WAV file in the "2 MIX folder" is loaded.

1)Set a blank CD-R/RW disc to the CD-R/RW drive.

You can select between "Track at once" and "Disk at once".

2)While the unit is stopped, press the [MENU/ENTER] knob to enter the MENU mode.

The display now shows the first page of the menu selection screen.

3)Use the [MENU/ENTER] knob to select "CD-RW " on the second page and press the [MENU/ENTER] knob.

The display now shows the CD-RW menu screen.

4)Use the [MENU/ENTER] knob to select "CD Burn " and press the [MENU/ENTER] knob.

The display now shows the Burning mode selection screen.

5)Use the [MENU/ENTER] knob to select the desired burning mode and press the [MENU/ENTER] knob.

The display now shows the screen for selecting a stereo WAV file in the "2 MIX folder" of the current song.

In the screen example below, only one stereo WAV file is stored.

10