Fostex VM04 owner manual Scene Recall, Press the Enter key after you have named your Scene

If you want to quit the Scene Store in the middle of its process, press the EXIT key. You can return to the Normal Mix mode any time.

5.Press the ENTER key after you have named your Scene.

The character section will momentarily show “-STORE-” and return to the Normal Mix mode.

VM04 Owner’s manual

The store process has been completed. The stored Scenes are kept even after powering OFF.

<Useful info>

You can press the STORE key instead of the ENTER key to store the Scene. If you do this, you won’t quit the Scene Store mode, i.e., you won’t return to the Normal Mix mode. So, you can carry on storing more Scenes one after another

8-2. Scene Recall

This is the mode to recall the Scenes. All the stored settings will be recalled. Regarding the Fader setting, the stored audio level will be perfectly recalled. However, the difference between the stored Fader position and actual Fader position will only be indicated by the flashing FADER ADJUST key.

<Note>

The recall content will differ depending on the setting of the later explained setup modes “Channel fader recall” and “Master fader recall.” Refer to page 25 for details on the “SETUP mode.”

1.Press the SCENE RECALL key.

The key will light up and the Scene number display will start flashing. You can enter the Scene Recall mode from whichever mode you are in.

For example, Normal Mix mode, Channel Edit mode

or Effect mode.

Scene No will blink

							SCENE
						RECALL	STORE
					SCENE No
CH	MASTER
OL		MAX
		R
0
6							EFFECT
12					EQ	TYPE	PARAMETER
24
48		L
1 2 3 4 L R 1	2 3 4	MIN	PAN	LO	HI	EFF
LEVEL	VIEW				EQ		SETUP

Lights up (green)

2.Rotate the DATA ENCODER and choose the Scene number you want to recall from 00 to 20.

If you want to quit the Scene Recall mode now, press the EXIT key. You can return to the Normal Mix mode any time.

3.Press the ENTER key.

The character section will show “-Recall-” momentarily and then the stored Scene name will appear. The recall has been completed. As far as audio is concerned, the audio level has also been recalled according to the stored Fader setting. However, at the same time, the FADER ADJUST key will start flashing.

As the VM04 Faders do not move automatically, this is the way the VM04 indicates that it has detected some discrepancy between the physical Fader position now and when the Scenes were stored. At this stage, as the VM04 is already in the Normal Mix mode, you can operate the Faders. Then, if you move all the faders, the FADER ADJUST

key light will switch off and a letter will appear in the character section next to the Scene name.

This stands for Edit and means the Fader position is different from the stored setting. Even if you move the Faders, it won’t change the Fader setting stored in the Scenes.

Finally, if you want to recall a Scene including the physical Fader position, see Fader Adjust mode.

<Useful info>

You can also press the RECALL key again instead of the ENTER key to recall the Scenes. In this case, as the VM04 won’t quit the Scene Recall mode, you will be able to keep recalling Scenes, one after another. This is very useful, for instance, if you are trying to recall a Scene, but you don’t remember its Scene number. You can search for it by listening to the sound.

				SCENE No
	CH	MASTER
	OL		MAX
	0		R
FADER ADJUST	6
	12			EQ
	24
	48		L
	1 2 3 4 L R 1	2 3 4	MIN	PAN LO HI EFF
	LEVEL	VIEW		EQ

Flashing

23