Friedrich YQ07, EQ08 operation manual Figure H, Step, Solid Masonry Construction

920-197-01

STEP 7	Cut two pieces of standard 1" lumber (supplied by installer) to the	STEP 9 Complete the installation by following STEPS 6 through 10 of Sash
	length and width required. Place in front and back of bottom sill chan-	Window Instructions (Page 8). Window Seal Gasket mentioned
	nel as shown in Figure G. Secure with nails (supplied by installer).	in STEP 8 will not be required.
STEP 8	Seal all holes in the cabinet with caulking compound (supplied	IMPORTANT: Before operating your unit, read STEP 10 of Sash
	by installer).	Window Instructions.

Figure H

SOLID MASONRY CONSTRUCTION

CAULK ALL SIDES

CABINET

MORTAR

NOTE: ELECTRICAL RECEPTACLE LOCATION

FROM POINT "X" MUST BE WITHIN A MAXIMUM

RADIUS OF 69" FOR 115V UNITS.

ELECTRICAL RECEPTACLE

POINT "X"

10