OVEN CONTROLS
Setting Self Clean Cycle Duration
The self clean key controls the self cleaning feature. If you are planning to use the oven directly after a self clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self clean cycle will actually take about 4 hours to complete.
It is recommend to use a 2 hour self clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).
To set the controls for a 3 hour self cleaning cycle to start immediately and shut off automatically:
1.Be sure the clock is set with the correct time of day and the oven door is closed.
2.Press self clean. CLn and 3:00 HR will show in the display. The control will automatically clean for a 3 hour period (default self cleaning cycle time). If a 2 or 4 hour clean time is desired, press self clean multiple times to toggle between 2, 3 or 4 hours.
3.Press start. A beep will sound and the DOOR and 
icon will flash; CLn will remain on in the display.
4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the DOOR indicator light and
icon 
will remain on. Also, the oven icon will appear in the display. Allow about 15 seconds for the oven door to lock completely.
When the Self Clean cycle is completed:
1.HOT will appear in the display. The time of day, the DOOR and 
icon will remain in the display.
2.Once the oven has cooled for approximately 1 HOUR, the DOOR icon will flash until the door unlocks, The door can be opened and timer will revert back to the time of the day.
Stopping a Self Clean Cycle
If it becomes necessary to stop or interrupt a self cleaning cycle due to excessive smoke or fire in the oven:
1.Press off.
2.The oven door can only be opened after the oven has cooled down and the DOOR icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.
The self clean and delay start keys control the Delayed Self Clean operation. The automatic timer will turn the oven on and off at the time you select in advance.
To set the control for the self cleaning cycle to start at a delayed time and shut off automatically (example: 3 hour self clean cycle to start at 4:30):
1.Be sure the clock is set with the correct time of day and the oven door is closed.
2.Press self clean. CLn and 3:00 HR will show in the display. The control will be set for a 3 hour clean period. If a 2 or 4 hour clean time is desired, press self clean multiple times to toggle between 2, 3 or 4 hours.
3.Press start. A beep will sound and the DOOR and 
lock icon will flash; the letters CLn will remain on in the display.
4.Press delay start. Enter the desired start time using the number keys 4 3 0.
5.Press start.
6.delay, DOOR and 
icons will remain on.
7.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the
door has been locked the DOOR and |
| indicator light |
will remain on. |
|
|
|
|
8.The control will start the self cleaning at the set start time, for the period of time previously selected. At that time, the delay message will go out; CLn and oven icon will appear in the display.
When the self clean cycle is completed:
1.HOT will appear in the display. The time of day, the DOOR and 
icon will remain in the display.
2.When oven cools approximately 1 HOUR, the DOOR icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.
25
