Removing and Replacing the Oven Door
CAUTION
The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.
IMPORTANT
Special door care instructions - Most oven doors contain glass that can break. Do not close the oven door until all the oven racks are fully in place. Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.
To remove oven door:
1.Open oven door completely, horizontal with floor (See Figure 18).
2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 19). A tool such as a small
3.Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 20).
4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).
5.Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 20).
To replace oven door:
1.Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 20).
2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 20 and Figure 21). The hook of the hinge arms must be fully seated onto the roller pins.
3.Fully open the oven door, horizontal with floor See Figure 18).
4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the locked position (See Figure 19).
5.Close the oven door.
CARE AND CLEANING
Oven door hinge locations
Figure 18: Door hinge location
| CK |
O | |
L |
|
Figure 19: Door hinge locks
about 10°
oven door
hinge
Figure 20: Holding door for removal
roller pin
hinge arm
Figure 21: Replacement and location of hinge arm and roller pin
27