COMPONENT
Pump Motor
100-120 VAC 50/60Hz (includes gasket 816-0093)
208 VAC 50/60 Hz (includes gasket 816-0093)
230-250 VAC 50/60 Hz (includes gasket 816-0093)
Pump Motor Wiring Assembly (used with above motor kits)
Pump, 4 GPM (15 LPM) (includes gasket 816-0093 and mounting screws) Nipple, ½-inch x 2 ½-inch
Elbow, ½-inch x 90º Nipple, ½-inch x 16-inch Pipe Plug, ½-inch
Tee, ½-inch
Flexline, 13-inch Oil Return (has female ends) Adapter, Male (used with Item 8; two required) Nipple, ½-inch x 9-inch
Valve, ½-inch Ball Handle, Valve
Handle, Oil Return Valve (attaches to item # 11) Elbow, ½-inch x 90º Street
Nipple, ½-inch Close Disconnect Fitting O-Ring (pkg of 5) Grommet, Oil Diverter Diverter, Oil
Bracket, Male Disconnect Support Contactor Block Assembly Nipple, ½-inch x 3½-inch
Thermal Switch, 100-120V Baldor Motors
Thermal Switch, 200-250V Baldor Motors Thermal Switch, 100-120V Magnatek Motors Thermal Switch, 200-250V Magnatek Motors Wiring Harness, Controller to Filter
Heater Strip, 120 VAC 50W, 70-inch
Heater Strip, 250 VAC 90W, 70-inch
Tape, Aluminum (2-inch x 50-yard (46m) roll)
2-13
