
FBR18 & FBRA18 SERIES GAS RETHERMALIZERS
CHAPTER 3: OPERATING INSTRUCTIONS
3.1Introduction
Mechanically, the FBR18 and FBRA18 rethermalizers are virtually identical, the only difference being that the FBRA18 units have an automatic filling (AutoFill) feature. Both units use the same digital temperature controller and mechanical timers.
In operation, a setpoint is programmed into the controller which then regulates burner firing to maintain the water in the cookpot at the desired temperature. Six individual
3.2FBR18/FBRA18 Digital Controller
|
|
|
| Celsius or |
|
Power | Digital |
| Fahrenheit |
| |
Switch | Display |
| Display Switch |
| |
| 9 . 9 | 9 | 9 | C |
|
|
|
| |||
Frymaster |
|
|
|
|
|
Temperature | Setpoint |
| Melt | Heating | |
or Setpoint | Adjustment | Cycle | Mode | ||
Display Switch | Arrows |
| Switch | Indicator |
OPERATING THE FBR18/FBRA18 DIGITAL CONTROLLER
WARNING
Ensure the cookpot is filled with water before turning the controller on. “Dry firing” will cause damage to the cookpot!
1.Turn the controller on by pressing the Power switch. The controller software version num- ber will display for 4 seconds in the digital display then change to the last programmed setpoint temperature.