FRYMASTER FPD65 SERIES GAS FRYERS

CHAPTER 4: FRYER OPERATIONS

4.2Boil-Out Procedure (cont.)

G.The burners will heat the boil-out solution to a simmer. Simmer the solution for approximately 45 minutes. Wearing protective gloves, scrub the sides of the frypot and the tubes with the L-shaped Teflon brush, being careful not to disturb the temperature sensing probes and the high-limit thermostat.

H.Do not allow the water level to decrease below the bottom OIL LEVEL line in frypot during boil-out operation.

WARNING

Water or boil-out solution MUST not be allowed to drain into the filter pan or filter

system. Irreversible damage will result if water is allowed into the system.

I.After boil out is complete, turn the computer off. Drain the solution from the frypot. Place a metal stockpot of sufficient size to safely hold the entire contents of the frypot under the drain port to collect the water/boil-out solution. Do not allow water or boil-out solution to drain into the filter pan. The filter pump is not designed for water operation, and will be irreparably damaged (see warning statement above).

J.Close the drain, add fresh water (without boil-out solution) and wash all surfaces of the frypot. Drain again.

K.Refill the frypot with fresh water and vinegar to neutralize any residual boil-out solution. Wash all surfaces of the frypot. Drain completely and wipe down all surfaces of the frypot to completely remove all water.

Computer-equipped fryers: See computer manual for boil-out programming and follow the above procedures for boil-out.

DANGER

Do not go near the area directly over the flue outlet while the fryer is operating.

Always wear oil-proof, insulated gloves when working with the fryer filled with hot

oil.

Always drain hot oil into a metal stockpot of sufficient size to safely hold the entire

contents of the frypot.

4-4

Page 26
Image 26
Frymaster FDP65 operation manual Boil-Out Procedure

FDP65 specifications

The Frymaster FDP65 is a state-of-the-art commercial fryer known for its reliability and efficiency in high-demand cooking environments. Designed to meet the rigorous requirements of restaurants and food service establishments, the FDP65 combines advanced technology with user-friendly features, making it a top choice among chefs and kitchen managers.

One of the key features of the Frymaster FDP65 is its patented "Fast Recovery" system. This technology ensures rapid temperature recovery after food is added, allowing for consistent frying results even during peak cooking times. The ability to maintain optimum temperatures helps improve food quality and decreases cooking times, ultimately enhancing the overall operational efficiency of the kitchen.

The FDP65 employs a durable stainless-steel construction, making it resilient and easy to clean. The fryer's smooth surfaces and rounded edges contribute to its hygienic design, which is crucial in maintaining food safety standards. Additionally, the unit is equipped with heavy-duty, solid-state controls that provide precise temperature management, further enhancing its reliability.

Another remarkable characteristic of the FDP65 is its innovative filtration system. The built-in filtration minimizes oil pollution, maximizing the lifespan of cooking oil, which leads to significant cost savings over time. The automatic filtration system regularly cleans the oil and eliminates food particulates, ensuring that every batch of fried food tastes as good as the first.

The Frymaster FDP65 features a large fry pot capacity, making it suitable for frying large volumes of food. This capability is particularly beneficial for establishments with high customer turnover and those that require fast service, such as quick-service restaurants and cafeterias. The fryer also has a robust heating element that guarantees a quick preheat, reducing waiting times for both customers and kitchen staff.

Safety is another priority in the design of the FDP65. It comes equipped with a temperature limiting device that prevents overheating, as well as a high-limit switch that offers additional protection against potential hazards. Ergonomically designed fry baskets and handles make it more convenient and safer for staff to use, further enhancing the fryer’s appeal.

In summary, the Frymaster FDP65 is an exceptional commercial fryer characterized by its advanced technology, robust construction, and user-friendly features. Its fast recovery system, automatic filtration, and safety mechanisms make it an efficient and reliable choice for any busy kitchen, ensuring that operators can serve high-quality fried foods consistently while managing costs effectively.