FRYMASTER FPD65 SERIES GAS FRYERS
CHAPTER 5: FILTRATION OPERATION
5.4.1 Filter Operation (cont.)
8.Begin the filtering process by pulling the yellow handle to open the
Begin the filtering process by pulling yellow handle to open oil return valve. Leave the drain valve (red handle) open during the filtering process.
9.Oil will begin to pump from the filter pan into the frypot. Allow the oil to circulate through the frypot for the remainder of the timed countdown (approximately 10 minutes). This process is known as "polishing".
Polishing the oil removes suspended particles, which increases the life of the oil.
10.The computer will display FILL at the end of the timed countdown. Replace the frypot grid rack. Close the red drain valve handle to begin refilling the frypot.
When the computer displays FILL, close the drain valve to begin refilling the frypot.
