Frymaster FR2 manual Replace filter o-rings, Frymaster, Quarterly FR 2 Q3, 2Remove filter pan

Replace filter o-rings			Quarterly	FR 2 Q3
Why	To keep the fryer’s filter pump in working order
Time required	2 minutes to prepare	5 minutes to complete
Time of day	At open; the fryer must be cool	For 24-hour restaurants: During a low-volume period

when the fryer can be turned off

Hazard icons

Tools and supplies

O-rings for the filter	Flat tip screwdriver
pump

Frymaster	Pi
Fryer All models using an M2000 Computer

Procedure

1Prepare fryer for procedure.

Check to make sure the fryer is cool. This procedure should be done only when the fryer is cool and the filter pan is empty.

2Remove filter pan.

Pull the filter pan out of the cabinet.

3Replace O-ring.

Remove the O-ring from the pan nozzle. Replace the O- ring with a new O-ring. O- rings can be purchased from your local authorized servicer.

Use only the manufacturer’s replacement O-ring. These rings are manufactured spe- cifically for use with hot cooking oils. Generic O-rings cannot be used for this pur- pose.

4Reinstall filter pan.

Reinstall the pan into the fryer cabinet.

Quarterly

FR 2 Q3

©McDonald’s Corporation · Planned Maintenance Manual · Revised June 2008 Page 1 of 1