Frymaster operation manual APPENDIX B Solid Shortening Melter Use, OCF30 SERIES ELECTRIC FRYER

OCF30™ SERIES ELECTRIC FRYER

APPENDIX B: Solid Shortening Melter Use

Reset oil reservoir system

•Ensure shortening melter is on.

•Fill melter with shortening.

•Allow 2-3 hours for solid shortening to melt. DO NOT attempt to use the top off system with unmelted oil in the top off system. The low oil reservoir display will come on if the fryer calls for oil before the shortening in the melter is liquid.

•Once the shortening is fully melted, press and hold the orange reset button to reset the display and reset the top off system.

Melter

ON/OFF switch

•DO NOT ADD hot oil to the

shortening melter. The temperature of the oil reservoir should not exceed 140°F. Add small amounts of solid shortening to the reservoir to ensure it has sufficient oil to operate the top-off system.

•For best results, DO NOT TURN OFF the solid shortening melter overnight.

•The on/off switch for the melter is also used as a reset switch if the system’s high limit temperature is reached.