4.Unlock dispose valve handle.
5.Pull the oil disposal valve and the pump will engage and empty the filter pan to the waste oil tank. The Waste Full light on the rocker panel will illuminate if the tank is full.
6.Filling with fresh oil? See Fill Vat from Bulk below. If not, switch to Normal Mode at rocker panel
C.1.4 Fill Vat from Bulk Tank
1.Ensure vat is empty and the drain valve is closed.
2.At the rocker panel, switch to Bulk Mode.
3.Open the return valve on the empty tank. Press the Add Fresh Oil button. Fill to the lower line in the frypot.
4.Close the return valve.
5.Ensure the filter pan is empty.
6.At the rocker panel, switch to Normal Mode.
*NOTE: It takes approximately fifteen seconds from the time the Add Fresh Oil button is pressed until the bulk fresh oil pump starts. It may take up to 25 seconds before the level in the vat begins to rise. It takes approximately one minute to fill a split vat and two minutes to fill a full vat.
