FujiFilm 16286187-4-KIT owner manual AE BKT EV Steps, ±1/3, Flash, EXTERNAL Flash

Using the Menus: Shooting Mode

J AE BKT EV STEPS [±1/3]

Choose the size of the exposure bracketing incre- ment used when O (AE bracketing) is selected in continuous shooting mode (P 46).

Choose from increments of ±1/3 EV, ±2/3 EV, and ±1 EV (note that the camera may not be able to use the selected bracketing increment if the amount of over- or under- exposure exceeds the limits of the exposure metering system).

I FLASH [±0]

Adjust flash brightness. Choose from values be- tween +2/3 EV and –2/3 EV. The default setting is ±0. Note that the desired results may not be achieved depending on shooting conditions and the dis- tance to the subject.

g EXTERNAL FLASH [OFF]

Choose ON when using an optional flash unit (ex- cept Fujifilm products) mounted on the camera hot shoe.

c

•The flash may not fully light the subject at speeds faster than 1/1000 s.

•Use auto or custom white balance (P 53).

•If the built-in flash is raised when ON is selected for g EXTERNAL FLASH, the built-in flash will fire once to provide a signal for the optional flash unit to fire.

•External flash units can be used in P, S, A, M or O (Sand Tonly) modes.

•Fujifilm external flash units do not require this setting.

a
• The camera can be used with flash units that provide
aperture adjustment, external metering, and sensitiv-
ity control. Some flash units that are designed spe-
cifically for other cameras can not be used.
	Menus
• For information on Fujifilm external flash units, see
Accessories from FUJIFILM (P 110).

91