FujiFilm 600011859 owner manual Important Safety Instructions, For Your Safety

For Your Safety

IMPORTANT SAFETY INSTRUCTIONS

•Read Instructions: All the safety and operating instructions should be read before the appliance is oper- ated.

•Retain Instructions: The safety and operating instructions should be retained for future reference.

•Heed Warnings: All warnings on the appliance and in the operating in- structions should be adhered to.

•Follow Instructions: All operating and use instructions should be fol- lowed.

Installation

Power Sources: This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions.

Grounding or Polarization: This video product is equipped with a polar- ized alternating-current line plug (a plug having one blade wider than the other). This plug will fi t into the power outlet only one way. This is a safety feature. If you are unable to in- sert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fi t, contact your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

Alternate Warnings: This video product is equipped with a 3-wiregrounding-type plug, a plug having a third (grounding) pin. This plug will only fi t into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fi re or electric shock.

Ventilation: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these open- ings must not be blocked or cov- ered.

The openings should never be blocked by placing the video prod- uct on a bed, sofa, rug, or other simi- lar surface.

This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the man- ufacturer’s instructions have been adhered to.

This video product should never be placed near or over a radiator or heat register.

Attachments: Do not use attachments not recommended by the video product manufacturer as they may cause hazards.

Water and Moisture: Do not use this video product near water – for ex- ample, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

Power-Cord Protection: Power-Sup- ply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, conve- nience receptacles, and the point where they exit from the appliance.

Accessories: Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious in- jury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manu- facturer, or sold with the video prod- uct. Any mounting of the appliance should follow the manufacturer’s in- structions, and should use a mount- ing accessory recommended by the manufacturer.

An appliance and cart com- bination should be moved with care. Quick stops, excessive force, and uneven sur-

faces may cause the appliance and cart combination to overturn.

Antennas

Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides informa- tion with respect to proper grounding of the mast and supporting struc- ture, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and require- ments for the grounding electrode.

ii