FujiFilm A330 owner manual Power Save Setting, Format, To restore power to the camera

SET-UP

POWER SAVE SETTING

ＳＥＴ－ＵＰ
1	2	3	4
	ＩＭＡＧＥ		ＤＩＳＰ．		: ＯＮ
	ＰＯＷＥＲ ＳＡＶＥ					２ ＭＩＮ
	ＦＯＲＭＡＴ					: ＯＫ
	ＢＥＥＰ				: ＬＯＷ

ＳＥＴ ＣＡＮＣＥＬ

When this function is enabled, the screen temporarily turns off (Sleep mode) and the viewfinder lamp (green) blinks at 1 second intervals to save power if the camera is not used for 30 seconds. If the camera remains unused for an additional interval (2 minutes or 5 minutes), it is turned off. Use this function when you want to get the maximum possible running time from your batteries.

●! The Power save setting is disabled during automatic playback, during rechargeable battery discharging and when a USB connection is being used.

The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it is left unused for a set some time (2 minutes or 5 minutes).

When the camera is in Sleep mode, pressing the Shutter button down halfway wakes the camera up so that it is ready to take pictures. This is useful since the camera can be ready to take pictures almost instantly.

●! Pressing any other button as well as the Shutter button wakes the camera up.

◆ To restore power to the camera ◆

ON OFF

FORMAT
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ ＯＫ？
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
ＯＫ	ＣＡＮＣＥＬ
	ＳＥＴ

To restore power to the camera to take pictures, briefly close and then re-open the lens cover. To play back images, hold down the “Playback” button for approx. 1 seconds.

Formatting erases all the frames (files).

Initialize the xD-Picture Card for use in the camera.

Back up important frames (files) onto your computer or another media.

1Press “d” or “c” to select “OK”.

2Pressing the “MENU/OK” button erases all the frames (files) and initializes the xD-Picture Card.

Formatting erases protected files also.

●! If “å”, “˚”, “ƒ” or “©” appears, see P.78 for information before formatting the xD-Picture Card.

50