FujiFilm A330 owner manual SET-UP menu options, Settings Display

■SET-UP menu options

	Settings	Display		Factory default	Explanation
					Specifies whether an image checking screen (photography result)
	IMAGE DISP.	ON/OFF		ON	appears after taking a picture.
					The image appears for a few moments and then recorded.
1	POWER SAVE	2 MIN/5 MIN		2 MIN	Reduces the camera’s power consumption and to subsequently
					turn the camera off when not being used. See P.50 for details.
	FORMAT		OK	–	Erases all files. See P.50 for details.
	§ BEEP	LOW/HIGH/OFF		LOW	Sets the volume of the tone emitted when the camera controls
					are used.
	DATE/TIME	SET		–	Corrects the date or time. See P.13 for details.
	TIME	SET		–	Specifies the time difference settings. See P.51 for details.
	DIFFERENCE
2
	qLCD	ON/OFF		ON	Specifies whether the LCD monitor is ON or OFF when the
					camera is turned on in Photography mode.
	FRAME NO.	CONT./RENEW		CONT.	Specifies whether frame numbers are assigned consecutively
					from previous numbers or begin again. See P.52 for details.
	USB MODE	¶/qWEB/		¶	Selects the function when the camera is connected to a PC.
		¢			See P.61 for details.
3				ENGLISH	Specifies the language used for LCD monitor display.
	VIDEO SYSTEM	NTSC/PAL		–	Specifies whether video output is set to NTSC or PAL.
	DISCHARGE		OK	–	Discharges rechargeable batteries. See P.76 for details.
					Resets all the camera settings (other than the DATE/TIME, TIME
4					DIFFERENCE LANG. and VIDEO SYSTEM) to the factory
	qRESET		OK	–	default values set at shipment. A confirmation message appears
					when you press “c”. To reset the camera settings, press the
					“MENU/OK” button again.

4

Settings

49