FujiFilm A330 owner manual USE AT DSC Mode, Set a camera, Connect a camera to a PC

6.3 CONNECTING TO A COMPUTER

USE AT DSC MODE

1 Set a camera

01				02 04
				ON	OFF
03	ＳＥＴ－ＵＰ
	１	2	３ 4
	ＵＳＢ ＭＯＤＥ
	言語／ＬＡＮＧ			:ＥＮＧＬＩＳＨ
	ＶＩＤＥＯ ＳＹＳＴＥＭ :ＮＴＳＣ
	ＤＩＳＣＨＡＲＧＥ			:ＯＫ
		ＳＥＴ		ＣＡＮＣＥＬ

1Insert an xD-Picture Card into your camera. Plug the AC power adapter connector into the “DC IN 3V” socket on the camera and then plug the adapter itself into the main power outlet.

2Slide the Power switch to the side to turn the camera on.

3Set the “USB MODE” setting in the “SET-UP” menu to “¶” (➡P.48).

4Slide the Power switch to the side to turn the camera off.

2 Connect a camera to a PC

Camera
(USB)socket
	(USB)	PC
AC-3V	socket

1Turn your PC on.

2Use the USB cable (included) to connect the camera to your computer.

3Turn the camera on.

●! Take care to ensure that the USB cable (included) is connected the correct way around and that the plugs are pushed fully into the connection sockets.

hWhen the camera and PC are exchanging data, the self-timer lamp blinks and the viewfinder lamp blinks alternately green and orange.

h“≥” appears on the LCD monitor.

hPower save and Auto power off are disabled during USB connection.

●! Before replacing the xD-Picture Card, always disconnect the camera from the PC using the procedure on P.68.

●! Do not disconnect the USB cable when the camera is communicating with the PC. See P.68 for information on the disconnection procedure.

66