Preliminary check of the case

6

When all is well, use a clean fingertip to apply the special silicone

 

grease. And then spread it on the surface of the O-ring until it is

 

completely covered.

 

O-ring

 

Only use the special silicone grease

 

provided.

 

After applying the grease, check that

 

there is no sand or other substances

 

attached to the O-ring.

7

Close the waterproof case.

 

➀ Close the waterproof case and turn the

 

open/close knob in the direction of the

 

“CLOSE” arrow to seal it.

 

➁ Lock the open/close knob.

 

When closing the waterproof case, take

 

care not to catch your fingers or palm in

 

the waterproof case.

8

Dip the empty waterproof case into a water tank or a bathtub and

 

check for water leaks. For how to check it, see page 13.

If a water leak is detected …

➀Immediately take the waterproof case out of the water and dry it on the outside.

➁ Make sure that there are no cracks in the waterproof case body. Check the O- ring for attached foreign particles, flaws, cracks, odd shape, or twisting, and for any foreign particles in the O-ring groove.

➂ When all is well, start over from the procedure on page 8.

If you find something wrong with the waterproof case, immediately stop using it and contact your FUJIFILM dealer.

EN-10