Conducting a final test

Carry out a final submersion test on the waterproof case after mounting the digital camera. To check for water leaks, watch for any water leaking in while immersing it in a water tank or a bathtub filled with water. Check it in a way that lets you take it out of water immediately (to save the camera inside) if you need to.

1 Immerse it in water for 30 seconds.

Dip it slowly in

water.

• If you see a continuous flow of air bubbles from the joint of the waterproof case while in the water, this indicates a leak.

• When all is well, operate the buttons

Joint

and take some test shots while it is under water.

ENGLISH

2 After slowly lifting the waterproof case out of water, closely check for the following:

Water

Water droplets near the joint of the

droplets

 

waterproof case.

 

Water pooled inside the waterproof

 

 

case.

EN-13