Positioning the Digital Camera in the Waterproof Case

3 Insert the silica gel pack into the space underneath the bottom of the camera.

Silica gel pack

Make sure to insert the silica gel pack correctly. If it is incompletely inserted, it will prevent the O-ring from acting as a seal, and water will leak in.

4

Confirm the following before closing the waterproof case.

 

 

 

• No part of the silica gel pack is

 

 

 

protruding.

 

 

 

• There is no dust, hair, or other foreign

 

 

 

particle on the O-ring, in the O-ring

 

 

 

groove, or on the edge face of the

 

 

 

waterproof case that engages with the

 

Silica gel pack

O-ring

O-ring.

 

• The camera is correctly seated and

 

 

 

aligned in the waterproof case.

5

When all is well, close the waterproof case (pg. 10).

→Check that the camera’s “ON/OFF” button can be correctly operated using the controls on the housing.

When closing the waterproof case, take care not to catch your fingers or palm in the waterproof case.

To prevent water leaks

Any foreign particles attached to the O-ring may cause a water leak. Remove the foreign particles (see page 22). If you cannot remove them, replace the O-ring

with a new one.

Hair

Lint

Sand

 

 

 

EN-12