7 Install the back-side O-ring (orange).
For correct installation, observe the sticker (orange) inside the waterproof case.
Match the flat face of the O-ring to the bottom face of the groove.
●Cross section of the O-ring
| ●Correctly installed |
Flat face | O-ring and groove |
●Cross section of the groove
Bottom face of groove
O-ring
When installing the O-ring, check that it neither twists, bends, nor bulges out of the groove.
Check both front and back side O-rings.
When carrying out O-ring maintenance, take particular care to avoid getting grease on the lens window and LCD monitor window. If there is any soiling on the lens window or LCD monitor window, gently wipe it off with a soft dry cloth.
