5

6

With the camera dismounted, make sure that there are no water droplets or foreign particles on the O-ring, close the waterproof case and turn the open/close knob in the direction of “CLOSE” arrow to seal it tight (pg.10). Wash it thoroughly with fresh water once again.

Try to remove any remaining salt by lightly moving the various buttons under the water.

We recommend soaking it in fresh water for about 1 hour.

If stored with drops of salty water on it, salt crystals will clog the movement of the open/close knob and other parts.

Rusting may also be caused.

When closing the waterproof case, take care not to catch your fingers or palm in the waterproof case.

Carefully wipe off the water droplets from the waterproof case.

Use a soft, lint-free piece of cloth or something similar.

Remove the water droplets from under the Shutter button, the open/close knob and the others.

ENGLISH

7 Open the waterproof case a little and dry it in a breezy place out of direct sunlight. After drying the case, store it where it will not be directly exposed to sunlight.

Do not use a hair dryer, warm or hot air, or direct sunlight to dry the waterproof case.

EN-21